ww w. m oxa.c om ema i l: i n fo@mo xa.co m
6-18
6
Video Networking Products >
VPort D351
Remote Monitoring Solutions
1-channel MJPEG/MPEG4 industrial video decoder
Introduction
The VPort D351 is a 1-channel video decoder for decoding MPEG4/
MJPEG video streams from VPort series video encoders (not include
VPort 2110, VPort 2140, VPort 2310, VPort 2141, and VPort 3310)
and VPort IP cameras back to analog video signals. The analog
video signal can be sent to legacy CCTV devices, such as monitors,
multiplexers, and matrix switches, which can be used as originally
intended as part of CCTV systems. In addition, bi-directional audio
enables ready-to-use voice over IP communication between the video
encoder and decoder.
Monitoring cameras that are part of large CCTV systems is easy with
the VPort D351, which can be set up to switch between different video
sources either manually or automatically within a given time interval.
Up to 64 video sources can be included in the list. In addition, the 2
DIs located on the top panel of the VPort D351 can be used to create 2
control buttons for up and down video source selection.
Decode MJPEG and MPEG4 video streams to analog video signal
›
automatically
Manual selection or automatic scan with maximum of 64 video
›
sources
2-way (1 in/1 out) audio supported
›
Supports transparent PTZ control with legacy PTZ controller ›
Supports SNMP for network management ›
Specifications
Video
Video Decoding: MPEG4, MJPEG (Auto detecting)
Video Input: Video streams from VPort series video encoders and IP
cameras over TCP/IP networks (not including VPort 2110, VPort 2140,
VPort 2310, VPort 2141, and VPort 3310)
Video Output: 1, BNC connector, NTSC or PAL
Resolution: Max. 540 TVL line
Video Source: Up to 64, selected manually by web server or digital
inputs, or selected automatically by scanning within a set time interval
Video Viewing:
Max. 30/25 FPS (NTSC/PAL) can be decodedUÊ
OSD (on-screen display) with video source, video source IP, date/UÊ
time, and customized information
Audio
Audio Inputs: 1 Line-in port; 1 Mic-in port
Audio Outputs: 1 Line-out port
Audio Encoding: PCM
Audio Decoding: Mono
Network
Protocols: TCP, UDP, HTTP, SMTP, Telnet, NTP, DNS, DHCP, UPnP,
RTP, RTSP, and SNMPv3
Ethernet: 1 RJ45 port, 10/100BaseT(X) auto negotiation
Serial Port
PTZ Ports: 1, RS-232 or RS-422/485 terminal block connector, max.
115.2 Kbps baudrate
Console Port: 1, RS-232 RJ45 port
GPIO
Digital Inputs: 2, max. 8 mA
“High”: +13V to +30V
“Low”: -30V to +3V
Relay Outputs: 2 (max. 24 VDC @ 1A)
LED Indicators
STAT: Indicates if system booted up properly or not
PWR1: Power 1
PWR2: Power 2
FAULT: Can be configured to correspond to system alarm, power failure,
video loss, or disconnected network
Physical Characteristics
Dimensions (W x H x D): 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in.)
Weight: 910 g
Installation: DIN-Rail mounting, wall mounting (optional kit)
Power Requirements
Inputs: 2 12/24 VDC and 24 VAC power inputs for redundancy
Environmental Limits
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
VPort D351
The certification logos shown here apply to some or all of the products in this
section. Please see the Specifications section or Moxa’s website for details.
(30 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern