Moxa Technologies VPort 251 Bedienungsanleitung PDF herunterladen (Seite 21)

VPort CGI Commands VPort CGI Commands

1-18

paritybit G/S 0: None

1: Odd

2: Even

Parity bit

ptzdriver G/S 1: Transparent PTZ

2: Custom Camera

3: Pelco D

4: Pelco P

5: DynaColor

PTZ camera selection

*Custom Camera: in this mode, VPort

will send the command string that is

defined in the related

“custcam_customcmd” CGI

commands.

Relation between the Custom Camera PTZ driver and Custom Camera Command setting.

custcam

In this section we define the PTZ command strings for assigning the PTZ driver the “Custom Camera”

(serial_ptzdriver=2) mode. The VPort will send this string pattern to the PTZ camera through the PTZ port.

Item Action Value Description

customcmd01 to

custtomcmd10

G/S Max. 60 char (CustCamString) 01: “Up” command

02: “Down” command

03: “Left” command

04: “Right” command

05: “Zoom In” command

06: “Zoom Out” command

07: “Focus Near” command

08: “Focus Far” command

09: “Home” command

10: “Stop” command

custcommand

Item Action Value Description

speedlinkname01

speedlinkname10

G/S Max. 8 char (BasicString) User defined command name

speedlinkcmd01 to

speedlinkcmd10

G/S Max. 60 char (CustCamString) User defined command instruction

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 29 30

Keine Kommentare

Moxa Technologies VPort 251 Bedienungsanleitung Seite 21